make all the difference!!
Sweet tail chop kit. Very satisfied, shipping was swift (19 days to Slovenia) despite the COVID mess. Real easy to install with the help of the video.
Very nice tail chop ,product recommend
Have been thinking about this tail chop for 10+ years. Finally went ahead and did it. Cutting the frame was easy as was setting up the integrated tail light and bracket. The only issue I had was what to do with the plate light wire since the new tail light didn’t need it. Cut and taped it off and does not seem to effect anything. The mod is quite easy and I think it cleans up the tail nicely.
Easy to install and looks very good!
Easy job, great product. I cut the frame with a small pipe cutter which produces a nice clean cut. Installing the frame for backlight and license plate is easy as fastening an m6-bolt. I bought the normal frame, but omitted the license plate light anyway.
Es la pieza que estaba buscando y no encontraba. Encaja perfectamente. Muy recomendable
Excellent product and great service. Was shipped quickly and safely and was happy to receive a high quality product in good packaging with very clear installation instruction. 10/10 would order again.
I was a little hesitate to purchase the kit and "chop" the tail but I'm so glad I did. Super easy instal and the instruction were easy to follow. I love the way the rear end of my monster looks so clean and tidy. One of the best investments on the bike.
A simple, sturdy and great addition to finishing off a monster tidytail with tail chop
The folks at MonsterTailChop are great! Ordering was easy and the kit arrived just a few days later. Installation was straight forward and the instructions that were included as well as the online video made me confident i could install it. Cutting your bike is not an easy thing to get your head around! I love the way my Monster 800 Dark now looks!!
Very well made kit. For the brake light + turn signals, its just plug and play. Just be careful if you use the tail chop to fix your bags. I did it and the tail chop rifted (it is not made for it). I had to ad two rilsan collars to secure the back light in place.
Fast shipping, great product and excellent service! THANKS, my bike looks a lot better.
Great, thanks a lot the installation and easy
The parts are solid and fitting is good. Recommended for those who haven't put it on yet.
Perfect fit, perfect look. Love it.
Fits perfect with very fool proof instructions.
Makes the bike look much cleaner. Had to cut some of the bottom supports to my seat so it would go back on, but definitely worth it.
Easy installation, it all just works. Anyone with a monster needs to tail chop it.
End result is perfect. You will need to manipulate the bracket a bit to get a good fit so the seat will sit in it’s proper place.
Clear instructions. Transforms the rear end of the monster S2R1000
Looks sick. Tidied it up very nicely. Easy to install as well
Easier to fit than I thought. Just a bit of mucking around to making wiring tidy. Had to cut my Number plate light to get out of old brackets, then soldered back together. Looks great.
UK 695 owner who knew from the beginning that the tail just had to go! There were a few cheaper alternatives but went with the market leaders as didn't want to leave any room for error when chopping the frame! Great instructions coupled with the youtube vid,, just make sure you've got the right tools and a decent junior hacksaw and you're good to go! Makes my 695 look like a junior diavel and really streamlines the bike - thanks to the guys at Monstertailchop!
Quick delivery.Fitted ,with no issues, perfectly and love the look. Thanks Ty.
My 3rd tail shop using this kit. Love it! Easy install and good instructions.
Support de plaque parfait ! Installation facile ! Je recommande !!
Easy fit and great end result. Thanks Monster Tail Chop
Tail chop bracket arrived without any drama, crystal clear instructions and fitted exact. Cut a small window in the base of my tail light lense and glued a piece of clear perspex in. Number plate now tight under the light an looks great! Only bad point is I can't see it when I ride!
Super produit, installation très simple
Absolut fine...is fixed....Top.....I m happy. ..better than german products ...Also one Week delivery time....Top....
Au top ! Livraison rapide et support de bonne qualité ! V
I purchased the tail chop kit for my 2001 Monster 750. The kit came in the mail within about a week. The install was quick and easy, took less than an hour. The new look is exactly what I was going for. I emailed Ty for some quick questions and he got back to me in no time (great customer service). I love this bike, however I love it more now that the back fender is gone, it just makes the bike look so much better. Thanks, - Mat
Great product. Easy Installation
Bought one for my 2002 monster and absolutely love it. Makes the bike look so much sleeker. The factory rear fender is way too extended and ugly. This gives it the clean look ive been looking for.
Niels Sonne A.
Using the tail chop guide and video was so easy and the bracket fit perfectly. My Monster 750 just looks so much better and sportier now.
Works like a charm on my M695 from 2007
The shipping from the US to Dubai was super fast and the installation was straight forward with no problems. The monster instantly looks 100% better and I’d recommend this tail chop to anyone.
Can recommend this product and Ty is very helpful,it did take a couple of weeks to do once I had the tail chop,should I cut a bit off the frame,but it's my bike and we are together " till death us do part"so no big deal,but I am really happy with the look and will be fitting the integrated rear light soon.Many thanks Ty.Vic in UK
I just picked up an 05 S2R800 that had a hoakie little tail chop going on with resistors cemented under the tail out in the open. I picked up the tail chop that allows for using the stock directionals which is what I wanted. Excellent product, the turns, the tail light and the licence plate light all fit nicely on the tail chop bracket. Very happy with the product and the results!!
Product well designed and made and really easy to fit. Thanks!!
Works perfectly as expected! Thank you. A little bit pricey for a metal plate but everything is good!
Sorry this took so long, I’m stationed overseas and I don’t normally leave reviews for a product that should do what it says......this is a clean, solid, great looking piece of equipment to add to your bike. I wish I would have “chopped the tail” years ago. I plan on getting another bike and will definitely come back. Thanks for putting out an AWESOME product!!!
The tailchop cleared up the rear of the Monster 695. In my opinion it gave it a much more modern look. It fitted without any problem and the instructions and quality of the product are of high standard. I highly recommend this product.
The fender fits very well on my 620 monster. So happy to get that look that i wanted ! Easy to install ! Cheers from France
Well I have to say I was extremely nervous about doing the tail chop, but really liked the look of the integrated tail light and so I finally plucked up the courage to give it a go. Basically I'm a novice tool type person who can barely change the oil and filter, but its done and all went well. I found getting the seat back on was the hardest part, the wires were all wound up in there very tight. Eventually though I got it locked back down. Very nice product and extremely happy. Even more happy when my girlfriend saw it and said "wow, that thing looks bad ass" That brought a smile to my face !!! The LED's are very bright and the turn signals are cool as hell. This upgrade is a must do. Also one last thing, the customer service from ducatimonstertailchop.com was amazing, easy to contact and replies within 24 hours.
Halfway there, already a huge improvement. Still waiting for turn signals & plate, one more update once it's done!
It does its job and it looks great. Fitment was good and instructions/installing was easy. Only issue was the electrical fitment with the original taillight where it became an issue. Luckily I didn't plan to keep stock light so it turned out well. Would buy again if I needed to.
Looks great, easy to install!
Yep, worked well & looks great for very little investment, thanks heaps.
All good, re-arranged the seat cable and had to drill another indicator hole but all is well.
The product arrived promptly, was well made and fit perfectly.
Love the chop. Simple, and supremely compatible. This is the Ducati Monster from the Netflix Original Film WHEELMAN (release date 10/20/2017). Two were used in the film, and this was taken from the stock bike used in the film, and turned into what you see now.
Really happy with this kit, I got the short version and it fits as I expected on my 620. Easy enough to install, even for me with limited experience. But I would recommend checking the instruction video first though, especially if you're like me and not so experienced in the garage :) A thing I noticed when installing was that since I have the high pipes on my 620, the included set of screws to mount the tail eliminator were to short. No problem though, I just got longer screws at a hardware store and I was good to go. Just a tip to the fellow high pipe people out there :) Great customer support as well! Thanks guys!
Installation was very easy! I like the looks now with new led tail light where the side blinkers are integrated and license plate light also. Good quality part for sure! Thanks for the awesome product!
Fast shipping and free even all the way from the states!! Awsome product Easy and fast installation new chop I do I will buy again!!
Very easy install. It took me about 30 minutes total
I didn't use the standard licence plate light but drilled some holes in the tail light and mounted the licence plate higher. It looks great and my plate holder is bolted in three places so I won't loose it.
Without a tail tidy, my S2R looked hideous to say the least. Installing the tail tidy was straightforward and easy to do. Now my bike looks like it should: Beautiful... and really stands out. I love it
Part of my project tho' a fair way to go. I couldn't be happier with your product. Everything went to your comprehensive directions without any problems at all. Looks fantastic. Highly recommended!
The quality of the product is perfect!, but it was a little more work than planned.. I thought I have a '2000 model' Ducati Monster, but apparently it's actually a 1999 model, which makes the tail chop job a little more complicated. I had to adjust some more than shown in the video.. With some 'creativity' thats no problem. The tail looks much better now!
Super easy to install and it looks really good ! Don't forget to order the colored tail plugs to match your frame color.
Fast delivery to sweden! Nice product!
Great quick service. Looks great with the plugs
Easy installation, looks great, very happy!
Perfect, it looks so much better, thanks !
Fantastic bit of kit, really finished the bike off by getting rid of that stupid tea tray suspended off the rear of the bike. Solid and a perfect fit, number plate fits snugly underneath it (I know mine appears to big, that's the correct legal size for its MOT). Very fast dispatch! Took only two days to get from Utah to Heathrow in the U.K. (and another 4 days to get from Heathrow, 125 miles up the road to me - but that's not MonsterTailChop's fault"). Massively appreciated! Stay shiny side up
Very basic kit to install and really transforms the bike!
Love the tail chop – the only thing I'd say is that it was a tad tricky making it work on my 1997 M600 but the end result looks awesome!
Well thought out product - the video is very helpful to augment the written instructions. Could be done in an hour, but best to set aside 2 hours and take your time to watch the video a couple times, measure twice/cut once, etc. I highly recommend also doing the integrated taillight, makes the rear end so clean!
Very nice very easy love it!
Very nice mod, one of the best out there. Easy and quick with great result. Gr from holland
The chop went perfectly. Love it! BRAAAAAAAAAAPHHH
Hello, everything went well. Part is great and now my S2R looks like he should :-). Greetings.
I installed the tail chop kit today and it looks great! I measured 1” back, taped the frame and used a set of tubing cutters that I have for plumbing and copper pipe. Took about 20-seconds to cut each side and was super clean and neat with no filing at all! Better way than a hack saw. Thanks.
Like the look. Great Kit.
Since I bought my Ducati I thought about chopping the tail. I WAS a little afraid about messing with the frame and the original parts. Thanks to the pictures of other Ducati owners, and encouragement of my friends I finally chopped it. I looks WAY better. I hope to return the favor by submitting my own pics
Hi! Thanks a lot for a great kit for my monster! Really easy instructions and a great result! I will recommend you to all my Ducati friends in Sweden!
Hi, here’s a couple of pics and my thoughts on the tail chop kit, it’s probably the easiest tail chop I’ve done (and I’ve done quite a few) the information available for the chop is plentiful,ie video/instructions. I had to cut down and re-drill for the number plate as the bracket is to suit a standard Sweden size plate
This was one of the first mods I did to my Monster and it’s still one of my favorites. Really cleans up the bike nicely. High quality kit with clear concise instructions which made it all very easy. Thanks!!
Just want to start off and say thank you, shipping was fast and quick. Installation was fairly easy and the product fitted perfect. I couldn’t be happier with the look. Tail chop was the first thing I had in mind when I got a monster and you were the first i came to. You guys do an awesome job. Once again, thank you.
Wow, tail chop a dream, looks ace but not so you get pulled by police! Instructions and video made it sooo easy, Bit scary taking hacksaw to my baby but results far outweighed that bit. Go for it everyone! Banish the plastic!
Got the Tail chop Kit superfast. Only 9 days shipping to the UK. Really pleased with the outcome, transforms the bike and gets rid of the ugly plastic at the rear. Also used the anodized bungs to finish off the frame tubes.Installation and instructions brilliant.
Greatest Tailchop ever very easy to install and it gives my S2R 1000a a great look !!!! Greetings from Austria.
Yes I got very quickly my tail chop for my Ducati Monster 900ie. I’m very satisfied with it, looks great and it is very easy for installation. Thanks a lot.
Got the parts ok, and pretty quick too. The installation went very smooth, awesome kit with clear instructions and quality manufacturing. Attached a picture for your reference, can barely even tell there is a license plate back there! Thank you.
Hi there Ty, Please see the pic attached of my Monster S2R800 Tail Chop using your kit. Worked a treat, thanks. I fitted a Ventura rack at the same time that necessitated some changes of bolts compared to the kit but it all worked ok.
Your kit was very easy to install, everything was exactly as the instructions said. The rear end of the bike looks so much cleaner and makes my Monster so much sexier. For anyone thinking of doing the mod, I highly recommend it! Thanks a lot Tail Chop!
Ty, Excellent kit, straight forward, well done, would recommend. Thanks.
The video instructions were super simple. It really helped the look of my bike.
The tailchop kit is great. Installation was easy and it looks great.
The tail chop could not have been easier, watch the video(or follow the printed instructions), do the chop, admire the result. The bracket arrived on time, everything fitted to it perfectly, love the finished job. Easy install, great result! Will do business again.
Sorry this took so long but I’ve been doing everything but ride the monster. Anyway, i was taking some photos recently and much credit goes to your tail chop kit. Keep up the good work! Best.
Your guys’ tail kit really made a huge difference!
Telmo Del Río
Hello, You´ve a great part. I love Ducati tail chop. Regards.
Thought you’d like to see the final result. Ordered the tail chop on Wednesday, came in Friday afternoon, installed Saturday afternoon. Would recommend this product to anyone. Thanks for shipping fast and making a great product!
Greetings: I am very happy with the new aesthetics of my Ducati monster 900. Very good accessories, the guide helped a lot was very easy to mount everything. the only thing I regret is not to buy LED light with you and I came from amazon has a small mistake but it is minimal. Thank you very much.
Home / Collections /Ducati Monster Fender Eliminator Tailchop 1997-2008 / Monster Fender Eliminator/Tail Chop